Pro1021 Metered Valve
Pro 1021 - 1" Metered Softener Valve
Security policy - Our web site features secure checkout with PayPal!
Delivery policy - We always ship your products by the fastest possible carrier.
Return policy - Call for RMA to setup returns and warranty information.
Pro 1021 - 1" Metered Softener Valve The Pro 1020 series water softener control valve is a 1” Electronic Program Valve. A control valve equipped with an electronic control board that offers 66 pre-programmed regeneration cycles with up-flow or down-flow regeneration capabilities and pre or post treated water regenerant refill. A coin cell lithium battery provides back-up with an 8 hour carry over.
This control valve is a direct replacement for the Clack WS-1 control valve. The AquaTek Pro line of control valves are the best in the water treatment and purification business and after 27 years of purification experience, we have found nothing better! The best controller on the market for water softener or other automatic chemical filter application.
The Pro 1000 series control valves employ simple hand tighten union construction for ease of installation and servicing. The Pro 1000 series control valves also feature complete 1" porting for higher flow rates and less pressure drop over older 3/4" control valves. Simple single stack piston and seal/spacer design insures ease of repair which, keeps labor costs at a minimum. Parts replacement are easily affordable as well.
Water Specialist 1” CS Control Specifications
Options: Backwash Filter, Bypass, Weather Cover
Compatible with the following typical concentrations of regenerants or chemicals: Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfite, chlorine and chloramines
Inlet/Outlet Fittings ¾" to 1.5” NPS
Cycles up to 6
Valve Material Noryl (1) or equivalent
Service @15 psi drop (includes bypass and meter) 27 gpm
Backwash @ 25 psi drop (includes bypass) 27 gpm
Cv Service 7.0
Cv Backwash 5.4
Minimum/Maximum 20 psi – 125 psi
Minimum/Maximum 40º – 110º F
Accuracy ± 5%
Flow Rate Range 0.25 – 27 gpm
Gallon Range 20 – 50,000 gallons
Totalizer 1000 - 9,999,000 gallons
DIMENSIONS & WEIGHT
Distributor Pilot 1.050" OD Pipe (¾" NPS)
Drain Line ¾” or 1” NPT
Brine Line 3/8” or ½” OD Poly Tube
Mounting Base 2 ½” - 8 NPSM
Height From Top Of Tank 7 3/8”
Weight 4.5 lbs.
AC Adapter U.S. / International
Supply Voltage 120V AC / 230V AC
Supply Frequency 60 Hz / 50 Hz
Output Voltage 12V AC / 12V AC
Output Current 500 mA / 500 mA
Water Softener 6” – 21” Diameter
Water Filter (2) 6” – 21” Diameter
CYCLES OF OPERATION (Softener Downflow) Cycle
Range of times minutes
1. Backwash 1st (upflow) 6 - 16
2. Regenerate Draw/Slow Rinse (downflow) 45 - 75
3. Backwash 2nd (upflow) 3 - 12
4. Fast Rinse (downflow) 3 - 10
5. Regenerant Refill (in service with treated water) As Programmed
1. Noryl is a trademark of Sabic Innovative Plastics IP B.V. Company
2. Filter tank size calculated @ 10 gpm of backwash per square foot of bed area